Electric Car EV Contactors

SW202a contactor This reversing contactor set has a 12V coil. It is very similar to the Albright SW202A reversing contactor. A contactor should never be switched under load. This contactor can be used for voltages up to 170V.

SW202A-Compatible Reversing Contactor Set - $185.00

Quantity: Check Out Using Our New Site ElectricCarPartsCompany.com!
Tyco contactor The EV200 is a low-cost, high-quality, high-voltage contactor. It can break up to 2000A and will carry continuously 500A at up to 320V if properly heatsinked at the terminals (using very large copper conductors - consult the datasheet for specifics). The contactor has magnetic blowouts to aid in the squelching of arcs if the contactor must make/break current.

Use only on 300V systems or lower

Tyco Electronics EV200AAANA with Bottom Mount and Wire Connections - $95.00

Quantity: Check Out Using Our New Site ElectricCarPartsCompany.com!
SW200 400A contactor The standard of the EV industry. Rated at 250 amps continuous and 96V DC, it has a 12V-24V DC coil, and comes with magnetic blowouts. A bracket and screws are included with the contactor. It has almost the identical size, dimensions, coil current draw, and internal spring force as the Albright SW-200 contactor. Multiples of this contactor can be used in series for higher voltage battery packs. Always ensure that the products you use are within their ratings. We use these contactors all the time at 500 Amps and 144 Volts.

EC-200 With Magnetic Blowouts - $90.00

Quantity: Check Out Using Our New Site ElectricCarPartsCompany.com!
contactor 22 12-volt-dc-100-amp-dc This contactor set has a 12V coil. A contactor should never be switched under load. This contactor can be used for up to 72V.

ZLJM-100D - 12 Volt DC - 100 Amp DC current at 80 Volts Contactor Set - $18.00

Quantity: Check Out Using Our New Site ElectricCarPartsCompany.com!